Rec Mode - Yamaha D24 Owner's Manual

The following illustration shows the procedure for auditioning.
From TR: 2

Rec Mode

Having selected "REC," press the [ENTER] button.
16
"TIME COMP—FROM TR nn" appears on the display ("nn" being the source track
containing the material to be processed).
Use the JOG/DATA dial to select the source track.
17
You can select individual tracks or track pairs: 1–8 or 1/2–7/8. To compress a virtual
track, assign it to a main track first, and then compress the main track.
Press the [ENTER] button.
18
"TIME COMP—ST MARK IN" appears on the display ("ST" being the start point of
the part to be processed).
Use the JOG/DATA dial to select one of the following points: MARK IN, MARK
19
OUT, MARK A, MARK B, or a locate memory from 1 through 99.
Press the [ENTER] button.
20
"TIME COMP—ST 00:00:00.00.0" appears on the display ("00:00:00.00.0" being the
position of the selected point).
Use the JOG/DATA dial or keypad to adjust the start position, and then press
21
the [ENTER] button.
"TIME COMP—ED MARK IN" appears on the display ("ED" being the end point of
the part to be processed).
Use the JOG/DATA dial to select one of the following points: MARK IN, MARK
22
OUT, MARK A, MARK B, or a locate memory from 1 through 99.
Press the [ENTER] button.
23
"TIME COMP—ED 00:00:00.00.0" appears on the display ("00:00:00.00.0" being the
position of the selected point).
Use the JOG/DATA dial or keypad to adjust the end position, and then press
24
the [ENTER] button.
If the duration of the specified part is less than 15 milliseconds, the minimum size, the
message "TOO SHORT" appears.
"TIME COMP—TO V_TR nn" appears on the display ("nn" being the virtual track to
which the processed material will be recorded).
ST point
00:01:00.00
Audition
ENTER
113
Time Compression
ENTER
D24—Owner's Manual