Yamaha D24 Owner's Manual page 114

110
Chapter 10—Editing Parts
Press the [ENTER] button to insert the copied part, or the [CANCEL] button
19
to cancel.
The specified part is copied and inserted into the destination track. Existing material on
the track is moved backward.
When the copy and insert operation is complete, "FINISHED" appears on the display
and the UNDO/REDO indicator lights up, indicating that it can be undone. See
"Undoing a Recording or Edit" on page 35 for more information.
To insert a copied part into another track, press the [ENTER] button to return to step 4.
Press the [EDIT] button to leave edit.
20
The EDIT indicator goes out.
In the following example, the part of track 2 between the ST and ED points is copied
and inserted into track 3 at the TO point and repeated twice. Existing material on the
track is moved backward.
D24—Owner's Manual
From TR: 2
To TR: 3
Original TR3
TO point
00:00:40.00
ST point ED point
00:01:00.00 00:01:15.00
Copy x1 Copy x2
Existing material moved backward