Manual Punch In/Out Recording - Yamaha D24 Owner's Manual

70
Chapter 7—Punch In/Out Recording

Manual Punch In/Out Recording

This section explains how to perform manual punch in/out recording for real. With the
Auto Input monitoring function turned on, playback and input monitor switching is
performed automatically at the LAST REC IN and OUT points. See "Monitoring" on
page 42 for more information.
The following illustration shows the procedure for manual punch-in/out recording.
READY
RECORD
READY
Use the [RECORD READY] buttons to select tracks for recording.
1
The corresponding READY indicators flash.
Press the [PLAY] button to start playback.
2
Playback starts and the PLAY button indicator lights up.
Press the [REC] and [PLAY] buttons simultaneously to punch in.
3
Recording starts, "RECORDING" appears on the display, and the REC button indicator
and READY indicators light up continuously. The LAST REC IN point is set automat-
ically and its indicator lights up.
Press the [PLAY] button to punch out.
4
The D24 stops recording and continues with normal playback.
The REC button indicator goes out and the READY indicators flash. The LAST REC
OUT point is set automatically and its indicator lights up.
The transport buttons are inactive for about one second following a punch out, due to
internal processing by the D24.
Press the [STOP] button to stop playback.
5
The PLAY button indicator goes out.
To play back what you've just recorded, press the LAST REC [IN] button to locate the
point at which recording started, and then press the [PLAY] button to start playback.
D24—Owner's Manual
1-1 1
2-1 2
2
3-1 3
4-1 4
5-1 5
6-1 6
7-1 7
8-1 8
Play
PLAY
2
LAST REC IN LAST REC OUT
point point
Record
REC PLAY PLAY
Play
STOP