Table of Contents
Advertisement
78
Chapter 8—Editing Projects
Copying Projects
The Project Copy function is used to copy projects.
Press the [EDIT] button.
1
The EDIT indicator lights up.
Use the JOG/DATA dial to select "PROJECT EDIT," and then press the [ENTER]
2
button.
Use the JOG/DATA dial to select "COPY," and then press the [ENTER] button.
3
"FROM PROJ nn—project title" appears on the display ("nn" and "project title" being
the number and title of the project to be copied).
Use the JOG/DATA dial to select the project that you want to copy, and then
4
press the [ENTER] button.
"TO NEWPROJ nn—ARE YOU SURE" appears on the display ("nn" being the next
available project number, which is the automatically assigned to the new project).
Press the [ENTER] button to copy the selected project, or the [CANCEL] but-
5
ton to cancel.
The selected project is copied.
When the copy operation is complete, "FINISHED" appears on the display.
To copy another project, press the [ENTER] button to return to step 4.
Press the [EDIT] button to leave edit.
6
The EDIT indicator goes out.
In the following example, project 2 is copied with new project number 4.
D24—Owner's Manual
01 PROJECT
02 PROJECT
01 PROJECT
02 PROJECT
03 PROJECT
Copied
03 PROJECT
04 PROJECT
Advertisement
Table of Contents
