Changing The Midi Out Setting - Yamaha P50-m Owner's Manual

Changing the MIDI OUT Setting

The MIDI OUT setting determines what incoming MIDI data is
relayed via MIDI OUT terminal on the rear panel.
With "ot1," all incoming MIDI data (over all MIDI channels)
is relayed via the MIDI OUT terminal. With "ot2," data received
over the selected MIDI Receive Channel (see page 17) is filtered
out, and only the data on the other channels is relayed.
Generally, when connecting another tone generator to the
MIDI OUT and using the P50-m with a sequencer or computer,
this should be set to "ot2."
If MIDI Receive Channel is set to "ALL" or the Voice number is set to 29
(no sound), all incoming MIDI data is relayed, regardless of the MIDI
OUT setting.
Settings: ot1, ot2
1.
Double-click the MIDI CH button (press it twice quickly).
2.
Use the DATA dial to change the MIDI OUT setting.
OPERATION GUIDE
Lamp flashes.
Double-click.
MIDI OUT setting.
21