Protecting Projects - Yamaha D24 Owner's Manual

82
Chapter 8—Editing Projects

Protecting Projects

The Project Protect function can be used to protect projects against accidental editing.
When a project is protected, it cannot be edited using the Project, Track, or Part edit
functions, although it can still be copied.
Select the project that you want to protect.
1
Press the [EDIT] button.
2
The EDIT indicator lights up.
Use the JOG/DATA dial to select "PROJECT EDIT," and then press the [ENTER]
3
button.
Use the JOG/DATA dial to select "PROTECT," and then press the [ENTER] but-
4
ton.
"PROTECT—PROTECT OFF" appears on the display.
Use the JOG/DATA dial to select either "OFF" or "ON."
5
The default setting is OFF.
Press the [ENTER] button.
6
"PROJ PROT—ARE YOU SURE" appears on the display.
Press the [ENTER] button to confirm your selection, or the [CANCEL] button
7
to cancel.
When OFF is selected, "UNPROTECTED" appears on the display, and when ON is
selected, "PROTECTED" appears.
Press the [EDIT] button to leave edit.
8
The EDIT indicator goes out.
D24—Owner's Manual