Storing Locate Points Automatically - Yamaha D24 Owner's Manual

Storing Locate Points Automatically

Locate points can easily be stored on-the-fly by using the Auto Memory Store function,
which automatically selects the next locate memory as each locate point is stored.
Press the [LOC MEM STORE] button.
1
The LOC MEM STORE indicator lights up, "STORE MEM nn" (the flashing "nn" being
the memory number), and the value already stored in the locate memory appear on the
display. If no value has been stored in the memory, "--:--:--.--.-" is displayed.
Use the JOG/DATA dial or keypad to select a locate memory from 1 to 99.
2
While holding down the [SET] button, press the [ENTER] button.
3
The current position is stored to the selected locate memory and the next locate mem-
ory is selected automatically.
Repeat step 3 to store further locate points.
4
Locate points can be stored while the D24 is stopped or during rewind, fast forward,
playback, recording, or rehearsal.
Press the [LOC MEM STORE] button to leave the Locate Memory Store func-
5
tion.
The LOC MEM STORE indicator goes out.
In the following example, the positions 00:01:00.00.0, 00:02:00.00.0, and 00:03:00.00.0
are stored to locate memories 01, 02, and 03 respectively during playback.
00:00:00.00.0
LOC MEM
STORE

Storing Locate Points Automatically

00:01:00.00.0 00:02:00.00.0
SET ENTER SET ENTER
LOC MEM: 01 LOC MEM: 02
00:03:00.00.0
Playback
LOC MEM
SET ENTER
STORE
LOC MEM: 03
D24—Owner's Manual
65