50
Chapter 5—General Operation
Using Roll-back
The Roll Back function rolls back from the current position in steps of between 1 and
30 seconds, the default being 5 seconds.
Press the [ROLL BACK] button to roll back by the specified amount.
1
If the [ROLL BACK] button is pressed during playback, the D24 rolls back by the spec-
ified amount, and then continues playing.
Setting the Roll-back Time
The roll-back time is set using the Roll Back function.
Press the [UTILITY] button.
1
The UTILITY indicator lights up.
Use the JOG/DATA dial to select "ROLL BACK," and then press the [ENTER]
2
button.
The currently set roll-back time appears on the display.
Use the JOG/DATA dial to set the roll-back time from 1 to 30 seconds.
3
Press the [ENTER] button to activate your selection, or the [CANCEL] button
4
to cancel the Roll Back time setting.
Press the [UTILITY] button again to leave utility.
5
The UTILITY indicator goes out.
D24—Owner's Manual
Current
position
Roll-back
Roll-back
time
time
ROLL
ROLL
BACK
BACK