Changing The Reverb Settings - Yamaha Clavinova CVP-105 Owner's Manual

Effects

Changing the Reverb Settings

You can change the reverb type and depth using the REVERB and
REVERB DEPTH display pages. With the CVP-109, you can also select
a Natural Reverb effect from the NATURAL REVERB page.
Displaying the Reverb Settings
Z Press [DIRECT ACCESS], then [REVERB]. Z Z Z Z
EXIT DIRECT ACCESS
The LCD displays either the REVERB page or the REVERB
DEPTH page (whichever was selected most recently).
If you are using the CVP-109, the LCD will display the NATURAL
REVERB page, the REVERB page, or the REVERB DEPTH page.
X X X X X Use the PAGE [<] and [>] buttons to switch between the NATURAL
REVERB page (CVP-109), the REVERB page, and the REVERB
DEPTH page.
.........................................................
DUAL SPLIT REVERB CHORUS
CVP-107/700
CVP-109
EFFECT
On the CVP-109, the NATURAL
REVERB display is page 1; the REVERB
and REVERB DEPTH pages are num-
bered 2 and 3, respectively.
If you press the [ > ] button while the
REVERB DEPTH page is showing, the
CHORUS page will be displayed. Refer
to the other sections of this chapter for
details on chorus and other effect set-
tings.
Reverb
47
CVP-109/107/105/700