Yamaha Clavinova CVP-105 Owner's Manual page 156

Step Edit
Applying Aftertouch to All Notes
Select the Channel Aftertouch event you want to edit in the event list
for the appropriate track (1 through 16).
The DATA function is displayed above the fourth LCD button.
Use the DATA button to select the channel aftertouch data param-
eter, then use the data dial or the [–] and [+] buttons to change the
value of this parameter.
Applying Aftertouch to Individual Notes
Select the Polyphonic Aftertouch event you want to edit in the event
list for the appropriate track (1 through 16).
Note number
The NOTE NUMBER and DATA functions are displayed above the
third and fourth LCD buttons.
Each Polyphonic Aftertouch event is defined by two pieces of data (in
addition to the timing, which is described on page 150).
Note Number
The note number setting determines which note is affected by the
aftertouch event. Use the NOTE NUMBER button to select this param-
eter, then use the data dial or the [–] and [+] buttons to change the note
number.
156
CVP-109/107/105/700
.......................................................
Channel aftertouch
data
DATA function
..................................
Polyphonic
aftertouch data
Polyphonic Aftertouch
event functions
Aftertouch Data
Range: 0 — 127
The internal tone generator of the CVP-
109/107/105/700 does not support poly-
phonic aftertouch. Although the Step Edit
function lets you add polyphonic
aftertouch data to a song (e.g., for use by
other MIDI instruments), this data will not
affect playback by the CVP-109/107/105/
700.
Note Number
• Settings: C–2 — G8