Yamaha Clavinova CVP-105 Owner's Manual page 48

Reverb
Changing the Natural Reverb Type (CVP-109)
You can change the Natural Reverb type selection in the NATURAL
REVERB display (page 47).
Use the left LCD buttons to select the desired Natural Reverb type.
You can also select a Natural Reverb type with the REVERB TYPE
and buttons, the data dial, or the [–] and [+] buttons.
The selected Natural Reverb type is highlighted.
Because the basic setting of the Natural Reverb type depends on the
current RIGHT1 VOICE setting, the Natural Reverb type may change
automatically when you select a different main voice (see page 31).
Changing the Reverb System (CVP-109)
You can assign each keyboard part to use either the Natural Reverb
system or normal reverb using the functions in the NATURAL REVERB
display (page 47).
Press the LCD button corresponding to the keyboard part whose
reverb system you want to change. Select LEFT to change the reverb
system for the left part, RIGHT1 for the main part, or RIGHT2 for the
second part.
The selected function switches between REV and N.REV.
Because the basic settings of the reverb system functions depend on
the current voice selection, these settings may change automatically
when you select a different voice.
48
CVP-109/107/105/700
...............
Natural Reverb Type
• Settings: See table on page 218.
• Basic setting: Depends on voice.
• The Natural Reverb type selection
affects all keyboard parts that use
Natural Reverb. Different settings
cannot be made for each part.
• The depth of the Natural Reverb effect
can be set separately for each part that
uses the effect (page 50).
• Depending on the selected voice, the
depth of the effect may sound stronger
or weaker, even though the same
reverb type is selected.
.................................
Reverb System
Settings: N.REV (Natural Reverb),
Basic setting: Depends on voice.
• If you switch a part to N.REV, it will
use the Natural Reverb type selected
in the NATURAL REVERB display.
• If you switch a part to REV, it will use
the reverb type selected in the
REVERB display.
REV (normal reverb)