Yamaha Clavinova CVP-105 Owner's Manual page 97

? Repeat until the custom style is complete.
Repeat steps 4 through 9 to record other parts for the currently se-
lected section.
Repeat steps 4 through 10 to record other sections, until all sections
have been recorded.
[ Name the custom style.
When your custom style is complete, use the PAGE buttons to select
page 3 of the CUSTOM STYLE display, then press the STYLE NAME
LCD button to display the NAME page.
Use the CHAR > LCD button to position the underline cursor at the
character you want to change (style names can be up to 12 characters in
length). Use the data dial and/or the [–] and [+] buttons to select the
character you want to enter from the list in the center of the display, then
press the CHAR SET LCD button to enter the character at the current
cursor position. Repeat this procedure until your name is complete. The
BACK SPACE LCD button can be used to back up one space and delete
the preceding character.
When the name is complete, press OK to register the name for the
current custom style, or CANCEL to abort.
.............................................................................
Creating Your Own Styles
..........................
During custom style recording, no MIXER
display is available.
97
CVP-109/107/105/700