Setting The Effect Depth - Yamaha Clavinova CVP-105 Owner's Manual

Setting the Affected Part
You can use the PART function in each EFFECT display to select the key-
board part that is to be affected by the corresponding effect system. To change
the part affected by one of the effect systems, display the EFFECT page for
that system, then press the LCD button under PART.
The value of the PART function changes, displaying each of the
settings (R1, R2, LEFT, and OFF) in turn.
Since the changing the value of the PART function means the effect
will probably be applied to a different voice, the effect type (page 56)
and effect depth (see below) may also change automatically to match the
voice that is currently selected for the chosen part.

Setting the Effect Depth

The DEPTH function in each of the EFFECT pages lets you adjust the
depth of the currently selected effect type. To set the depth of the effect
produced by an effect system, select DEPTH in the appropriate EFFECT
page, then and use the data dial or [–] and [+] buttons to change the value.
The DEPTH value changes.
You can also advance the value by holding down the DEPTH button.
To reset the value to its basic setting, simultaneously press the [–] and
[+] buttons.
Since the basic setting of the DEPTH function depends on the voice
selected for the part affected by the effect system in question, the effect
depth may change automatically when you select a different voice.
.................................................................................
.............................................................................
Voice Effects (CVP-109/107/700)
PART
Settings: R1 (main)
R2 (second)
LEFT
OFF (no effect)
Basic settings: R1 (EFFECT 1)
When neither effect system has been
assigned to the keyboard part that is
currently selected in the main display, the
[EFFECT] button cannot be used to turn
an effect on.
DEPTH
• Range: 0 (no effect) - 127 (max.)
• Basic setting: Depends on voice.
The effect depth cannot be changed for
certain effect types. In such cases a row
of dashes ( - - -) is displayed as the
DEPTH setting, and the DEPTH function
cannot be selected.
R2 (EFFECT 2)
57
CVP-109/107/105/700