Yamaha Clavinova CVP-105 Owner's Manual page 59

The LCD displays the EFFECT page that was used most recently.
X Use the PAGE [<] and [>] buttons to switch between the EF-
FECT pages.
Changing the Effect Type
You can change the effect type selection in the first EFFECT page
(page 4 of the display). Select an effect type using the EFFECT TYPE
buttons, or highlight the EFFECT TYPE function and use the data
and
dial or the [–] and [+] buttons.
You can also use the left and right LCD buttons to select one of the
effect types listed in the display screen.
To reset the effect type to its basic setting, simultaneously press the
EFFECT TYPE
and
The selected effect type is highlighted.
Because the basic setting of the effect type depends on the voice, the
effect type may change automatically when you select a different voice.
.........................................................................
buttons or the [–] and [+] buttons.
Voice Effects (CVP-105)
Effect Type
• Settings: See table on page 219.
• Basic setting: Depends on voice.
• The effect type selection affects all
keyboard parts. Different settings
cannot be made for each part.
• When the basic setting of the [EF-
FECT] button is ON for two or three
voices selected in Dual and/or Split
mode, the Clavinova will automatically
select the most appropriate effect type
and set the effect depth (page 60) for
each part to an appropriate level.
• Depending on the selected voice, the
depth of the effect may sound stronger
or weaker, even though the same
effect type is selected.
• If both the [EFFECT] button and the
[REVERB] and/or [CHORUS] buttons
are turned on, all effects will be ap-
plied.
CVP-109/107/105/700
59