Yamaha Clavinova CVP-105 Owner's Manual page 211

C Set the tuning.
Set the pitch by pressing the TUNE
data dial or [–] and [+] buttons. You can play the key being tuned to
check the sound during this operation. The default tuning of 0 cents
can be instantly recalled for the selected key by simultaneously press-
ing the TUNE
and
V Repeat steps 2 and 3 until all the required keys have been tuned.
User Scale Files
...................................................................................................
The custom scale can be named and saved to disk as a user scale file.
User scale files can be loaded whenever necessary, or deleted when they
are no longer needed.
Z Insert a disk in the disk drive.
Make sure that a properly formatted disk has been inserted in the disk
drive before executing a file operation. If you want to load, delete, or
rename a user scale file, the inserted disk should contain the file in
question.
X Select the desired file operation.
Use the second LCD button from the right to select the desired file
operation: LOAD, SAVE, DELETE or NAME.
C Press the START button.
After the START button is pressed, the display corresponding to the
selected file operation appears.
The subsequent steps are the same as those explained on pages 193
through 195. Refer to the pages below, depending on the selected file
operation.
LOAD
SAVE
DELETE
NAME
or buttons, or by using the
buttons.
See page 193.
See page 194.
See page 195.
See page 195.
Utility
TUNE
• Range: -64 cent — +63 cent
• Basic Value: 0 (all keys)
CVP-109/107/105/700
211