Saving Your Changes - Yamaha Clavinova CVP-105 Owner's Manual

Saving Your Changes

Use the following procedure to save the data you have edited or re-
corded in Step Edit mode:
Z Open the STEP EDIT page, if necessary.
If you are currently using page 2 or 3 of the STEP EDIT display,
press the PAGE [<] button once or twice to display page 1.
X Select the save function.
Press the top right LCD button to select the
The "Are you sure?" message is displayed.
C Select a song number, if necessary.
Use the SONG
and
(If you do not change the song number, the original version of the song
will be replaced by the edited data.)
The selected song number is displayed by the SONG function. If
a song name is also displayed, the selected song number con-
tains song data that will be replaced by the edited data.
V Save the data.
....................................................................................................
Press OK to save, or CANCEL to return to Step Edit mode.
If you press OK, the Clavinova will display the "Don't remove
the disk!" message and bar graph as it saves the data to the
disk, then redisplays the STEP EDIT page.
B Exit the Step Edit mode.
Press either [REC] or [EXIT] once to exit the Step Edit mode, or
twice to exit the Song Record mode altogether.
.......................................................................
function.
.........................................
buttons to select a different song number.
........................................................................
................................
If you don't see the
edge of the display, press the SHFT button
(the bottom right LCD button) to display it.
CAUTION
You cannot save the edited song data to
a different disk. If you remove the disk
from the disk drive before saving the
song (that is, before completing step 4
of this procedure), any changes you
have made in the Step Edit mode will be
lost.
Exit Without Saving
If you try to exit the Step Edit mode without
first saving the data that you have edited or
recorded, the Clavinova will display a "Write
edited data?" message. Press YES if you
want to save the data, NO to exit the Step
Edit mode without saving, or CANCEL to
return to Step Edit mode. If you select YES,
the "Are you sure?" message will be dis-
played. Follow steps 3 and 4 of the proce-
dure at left to save and exit.
Step Edit
function at the right
165
CVP-109/107/105/700