Yamaha Clavinova CVP-105 Owner's Manual page 157

Polyphonic Aftertouch Data
The polyphonic aftertouch data setting determines the amount of
aftertouch that is applied to the specified note. Use the DATA button to
select the polyphonic aftertouch data parameter, then use the data dial
or the [–] and [+] buttons to change the value of this parameter.
Editing System Exclusive and Meta Events
Select the System Exclusive or Meta event you want to edit in the
event list for the appropriate track (1 or SYSTEM).
The < and > functions are displayed above the third and fourth
LCD buttons.
Every System Exclusive or Meta event is displayed as a series of
two-digit hexadecimal values, each of which represents a byte of data.
Use the < and > buttons to select a data byte, then use the
data dial or the [–] and [+] buttons to change the value of the
selected byte. Repeat to edit other bytes as needed.
Aftertouch Data
• Range: 0 — 127
......................
• Exclusive data (see page 146) is loaded
into Track 1.
• Meta events (see page 146) are loaded
into the SYSTEM track.
• Meta events that cannot be edited will not
appear in the event list.
System exclusive
data
< and > functions
System Exclusive Data
• First byte: F0
• Data bytes: 00 — 7F
• Last byte: F7
Meta Event Data
• First byte: FF
• Data bytes: 00 — FF
The Clavinova can only display the first 35
bytes in a System Exclusive or Meta event.
Any bytes of data beyond this limit cannot
be edited using the Step Edit function.
Step Edit
157
CVP-109/107/105/700