Changing The Time Signature - Yamaha Clavinova CVP-105 Owner's Manual

Step Edit

Changing the Time Signature

Select the Time Signature event you want to edit in the event list for
the SYSTEM track.
Numerator value
Denominator
The TIME function is displayed above the fourth LCD button.
Use the TIME button to select the numerator or the denominator
of the time signature, then use the data dial or the [–] and [+] but-
tons to change the selected value.
Editing a Note
Select the Note event you want to edit in the event list for the appro-
priate track (1 through 16).
Note number
Velocity
Note event
functions
The NOTE NUMBER, VELOCITY, and GATE TIME functions are
displayed above the third, fourth, and fifth LCD buttons.
Each note is defined by three pieces of data (in addition to the timing,
which is described on page 150).
Note Number
The note number determines which note on the keyboard is played.
Use the NOTE NUMBER button to select this parameter, then use the
data dial or the [–] and [+] buttons to change the note number.
Velocity
The velocity setting determines how hard the note is played. Use the
VELOCITY button to select this parameter, then use the data dial or the
[–] and [+] buttons to change the velocity.
152
CVP-109/107/105/700
...............................................................
.........................................................................................................
Time Signature
Settings: 1/2 — 4/2,
TIME function
Gate time
Note Number
Range: C–2 — G8
Velocity
Range: 1 (min.) — 127 (max.)
1/4 — 8/4,
1/8 — 16/8,
1/16 — 16/16