Changing The Metronome Settings - Yamaha Clavinova CVP-105 Owner's Manual

Using the Metronome

Changing the Metronome Settings

You can change the metronome's time signature and volume using the
settings in the METRONOME page.
Displaying the Metronome Settings
To display the METRONOME page, press [DIRECT ACCESS], then
[METRONOME].
EXIT
The METRONOME display appears.
Setting the Beat (Time Signature)
Use the BEAT
function is highlighted, you can also change its settings with the data dial or the
[–] and [+] buttons.)
When NORMAL is selected, the metronome ticks steadily at the current
tempo with no accented beats.
When BEAT is set to 2, 3, 4, or 5, the metronome ticks off measures with the
selected number of beats, playing a bell sound on the first beat of each measure.
Setting the Metronome Volume
Use the VOLUME
(If the VOLUME function is highlighted, you can also change its settings
with the data dial or the [–] and [+] buttons.)
The volume of the metronome is determined by both the VOLUME func-
tion and the [ACMP/SONG VOLUME] slider (except in Song mode, in
which case the volume of the metronome is not affected by the slider). If you
use the slider, the playback volume for the Automatic Accompaniment (page
62) will also be affected.
28
CVP-109/107/105/700
DIRECT ACCESS
METRONOME
buttons to change the time signature. (If the BEAT
and
and buttons to change the metronome volume.
..............................................
TEMPO
RESET
....................................................
..........................................................
BEAT
• Settings: NORMAL, 2 — 5
• Basic setting: NORMAL
VOLUME
• Range: 0 — 127
• Basic setting: 64