Changing The Main Voice In Split Mode; Changing The Keyboard Settings For The Left Voice - Yamaha Clavinova CVP-105 Owner's Manual

Playing Two Voices on Different Sides of the Keyboard — Split Mode

Changing the Main Voice in Split Mode

To change the main voice while playing in Split mode, select the
RIGHT1 VOICE function then select the main voice in the normal manner.

Changing the Keyboard Settings for the Left Voice

You can use the settings in the KEYBOARD [LEFT] display page to
change the volume, octave, and pan of the voice selected using the LEFT
VOICE function. You can also select the keyboard range that is affected
by the pedals, as well as the split point that separates the right and left
ranges, using the functions in this page.
Displaying the Left Voice Keyboard Settings
Press [DIRECT ACCESS], then [SPLIT].
The KEYBOARD [LEFT] display appears.
EXIT DIRECT ACCESS
Setting the Volume of the Left Voice
You can use the VOLUME function in the KEYBOARD [LEFT] page
to change the volume of the left voice.
Z Z Press the VOLUME button. Z
Z Z
The VOLUME function is highlighted.
X X
X X Adjust the volume of the left voice. X
Use the data dial or [–] and [+] buttons to change the volume, or hold
down the VOLUME button to increase the volume.
Press the [–] and [+] buttons simultaneously to restore the basic setting.
42
CVP-109/107/105/700
DUAL SPLIT REVERB CHORUS
...........................................
If you use the VOICE buttons to select a
voice while either the tempo or the KBD
VOL function is highlighted, the voice you
select will be used as the main voice.
The settings you make in this page affect
any voices you select using the LEFT
VOICE function. Different settings cannot
be made for each voice.
If the LEFT VOICE function is selected in
the main display, you can also display
....................
the KEYBOARD [LEFT] page by pressing
[DIRECT ACCESS] followed by any one
of the VOICE buttons.
You can switch between the KEYBOARD
EFFECT
[LEFT] page and the [RIGHT1] (page 36)
or [RIGHT2] (page 39) displays using the
PAGE [ < ] and [ > ]buttons.
To adjust the overall keyboard volume,
use the KBD VOL function in the main
display (page 23) instead.
VOLUME
• Range: 0 — 127
• Basic setting: 127