Yamaha Clavinova CVP-105 Owner's Manual page 34

Selecting Voices
Editing the Voice
Select the desired voice for editing, then set each parameter.
The ORGAN FLUTES display has two pages: [FOOTAGE] and [AT-
TACK]. Press the rightmost LCD button to change between the displays.
Press the PRESET button in each display to instantly return to the pre-
edited voice.
Making settings in the ORGAN FLUTES [FOOTAGE] dis-
play
Footage volume settings
Select the footage "bar" to be adjusted by using the CURSOR but-
tons, then set the volume by using the data dial or [–] and [+] buttons.
Setting the speed of the rotary speaker effect
Press the middle LCD button to change between FAST and SLOW.
Voice Type and Volume Image (About Organ Footages)
The standard pitch is 8 feet. A setting of 4 feet is one octave higher
than 8 feet, 2 feet is two octaves higher, and 1 foot is three octaves
higher; 16 feet is one octave lower.
,
8
,
16
34
CVP-109/107/105/700
...............................................................................................
Continuous tones
, ,
4 2
1+
, ,
1 2
5 + / 2+ /
3 3
Decay tones
,
,
4
1 /
3 ,
1
,
2+ 2 /
3
,
2
To call up the [ATTACK] display, either
press ATTACK or press the CURSOR >
button when the cursor is at "1."
• The FAST/SLOW function is only
displayed when an effect (page 54) is
being applied to the keyboard part
playing the Organ Flutes voice.
• If an effect type other than rotary
speaker is applied to a part playing the
Organ Flutes voice, the FAST/SLOW
function switches the effect variation
on or off (see page 56) instead of
adjusting the speaker modulation
speed.