Keyboard Percussion; Changing The Keyboard Settings For The Main Voice - Yamaha Clavinova CVP-105 Owner's Manual

Selecting Voices

Keyboard Percussion

The Clavinova has eleven drum kits (ten on the CVP-105) and two
SFX kits, found on display pages 2 and 3 of the [PERCUSSION] voice
group. When one of the drum or SFX kits is selected, various drum, per-
cussion, and special effect sounds are assigned to individual keys, letting
you play the sounds from the keyboard.
The various drums and percussion instruments of the Standard
Kit are indicated by symbols above the assigned keys.
See the drum/SFX kit list on page 10 in the Reference Booklet for a
listing of the sounds in each drum/SFX kit.
PIANO E. PIANO GUITAR
SAX /
BRASS FLUTE BASS

Changing the Keyboard Settings for the Main Voice

You can use the settings in the KEYBOARD [RIGHT1] display page
to change the volume, octave, and pan of the voice selected using the
RIGHT1 VOICE function.
Displaying the Main Voice Keyboard Settings
Z If you are playing in Dual mode or Split mode, make sure RIGHT1
VOICE is selected in the main display.
X Press [DIRECT ACCESS] followed by any of the VOICE buttons.
The KEYBOARD [RIGHT1] display appears.
EXIT DIRECT ACCESS
36
CVP-109/107/105/700
VOICE
SYNTHE- STRINGS/
SIZER ORGAN CHOIR
PER-
CUSSION ENSEMBLE XG
PIANO E. PIANO
SAX /
BRASS FLUTE
.................
VOICE
SYNTHE-
STRINGS/
GUITAR SIZER ORGAN CHOIR
PER-
ENSEMBLE
BASS CUSSION XG
• When a drum kit is selected, only the
keys with drum or percussion symbols
printed above them will sound.
• When an SFX kit is selected, keys
other than those which have been
assigned a special effect sound will not
produce any sound.
• The Transpose (page 188), Tune (page
188) and Octave (pages 37, 39 and 43)
functions do not affect the drum/SFX kits.
The settings you make in this page affect
any voices you select using the RIGHT1
VOICE function. Different settings cannot
be made for each voice.
You can switch between the KEYBOARD
[RIGHT1] page and the [RIGHT2] (page
39) or [LEFT] (page 42) displays using
the PAGE [ < ] and [ > ] buttons.