Setting The Metronome Time Signature - Yamaha CLP- 585 Owner's Manual

Playing Various Musical Instrument Sounds (Voices)

Setting the metronome time signature

1.
Press the [METRONOME/RHYTHM] button (or the
[METRONOME] button on the CLP-535/565GP) to call up
the Metronome display.
Metronome playback starts.
2.
Set the Time Signature.
585 575
Select the highlighted item in each display as illustrated below
using the [ ]/[ ]/[<]/[>] buttons.
In the Click display, select the desired Time Signature.
Metronome display
2-1.
Use the [ ]/[ ] buttons
to select "Type. "
2-2.
Press the [>] button to
call up the next display.
585 575
Highlight "Time Signature," then select the desired Time Signature
using the [<]/[>] buttons.
Metronome display
36
CLP-585/575/545/535/565GP Owner's Manual
2
1, 5
545 535 565GP
Time Signature
2-3.
2-4.
545 535 565GP
Time Signature
3
Use the [ ]/[ ] buttons
to select "Click. "
Press the [>] button to
call up the next display.
NOTE
The Metronome display cannot
be called up while a display
other than Voice or Song is
shown, or while a Song is
playing back or being paused
temporarily, or while the
instrument is in the Song
Recording mode.
NOTE
You can select Rhythm from the
Metronome display (page 49).
Checkmark
2-5.
Use the [ ]/[ ] buttons
to select the desired
Time Signature.