Mitsubishi S16R Series Operation & Maintenance Manual page 32

1 SAFETY
Precautions for Warning Labels
Make sure that all warning/caution
labels are legible. Clean or replace
the warning/caution labels when the
description and/or illustration are not
clear to read.
* Unreadable warning labels cannot be noticed
and they may cause to personal injury,
environmental pollution, and damage to engine.
* For cleaning the warning labels, use a cloth,
water and soap. Do not use cleaning solvents,
gasoline or other chemicals to prevent damage
to the print or peeling off of the label.
* If any engine part on which a warning label is
attached is replaced with a new one, purchase
a new identical warning label from your SME
dealer and attach it to the new part.
Other Precautions
Never cut the seal of the fuel control
link.
* If you cut the seal, damage to the engine or
deterioration in the exhaust gas properties
could occur.
* In case that the seal is cut, warranty will
become invalid.
Never peel off the label at the fuel
inlet or other labels that are not
allowed to remove.
* Doing so may be against the law or regulations.
32
Precautions for Auxiliary
Facilities of the Generator
■ Water heater
Do not touch the water heater even
after stopping of the engine.
* Even after stopping, water heater is at high
temperature and touching it may cause burns.
For the generator with a water heater,
connect the wiring of the water
heater correctly.
* Otherwise, flue explosion may occur, which
could cause serious personal injury or damage
to the devices.
For the generator with a water heater,
always set the water heater switch to
"ON".
* If you start up the engine when the water heater
switch is "OFF", incomplete combustion may
occur, which could result in flue explosion or
deterioration in the exhaust gas properties.
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
Pub. No. K29001-00320 Revision: 1