Operation - Mitsubishi S16R Series Operation & Maintenance Manual

OPERATION

■ Daily Check
<Operational Environment - Check>
Do not operate in an environment
below the lower limit of the ambient
temperature specified in the
specifications sheet.
* Otherwise, flue explosion may occur, which
could cause serious personal injury or damage
to the devices.
* When operating in an environment below the
lower limit of the ambient temperature, it is
necessary to install an additional water heater.
Do not operate in an environment
above the upper limit of the ambient
temperature specified in the
specifications sheet.
* A violation of the law related to the devices
could result.
* Damage to the engine due to overheat or
worsen exhaust values will result.
* When operating in an environment above the
upper limit of the ambient temperature, it is
necessary to reexamine the operating
conditions and operating time.
Keep away from fire, when working
with flammable substances such as
fuel, engine oil, coolant (LLC), grease,
rust preventive oil and anti-corrosive
agent.
* They could cause a fire.
Do not place flammable substances
such as fuel and engine oil around the
engine.
* They could cause a fire.
Make sure that there is no water
(especially, seawater or rain water)
seeped in the air intake and exhaust
ports.
* Piston scuffing (contact of the piston with the
cylinder inner wall) and damage to the devices
could result.
Make sure that no foreign particles
get into the air inlet.
* They could cause damage to the turbocharger
and lead to serious problems in the engine.
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
Pub. No. K29001-00320 Revision: 1
Make sure that there is no
contamination of water into the fuel,
engine oil, air inlet and exhaust
systems and combustion chambers.
* Flue explosion, deterioration in the exhaust gas
properties or damage to the devices could
result.
Make sure that there is no clogging in
the air cleaner or pre-cleaner.
* Otherwise, the engine stopping device will work
to stop the engine suddenly and cause
deterioration in the exhaust gas properties.
Make sure that there is no clogging in
the air cleaner element or pre-cleaner
element.
* The thermal load could increase excessively
and will cause piston scuffing.
Before maintaining electrical
components, place the battery switch
to the OFF position or disconnect the
battery negative (-) terminal.
* Electric shock could result when electricity flows
through the circuit.
Be sure to operate the engine in an
environment of appropriate humidity.
* High humidity, inrush of rain water, or water
condensation in the combustion chamber may
cause falling off of valves or water hammering
and lead to damage to the devices.
Before starting the engine, check that
there are no bolts, nuts, tools, etc.
around the rotating parts.
* When the rotating parts work, the above objects
can fly and cause personal injury or damage to
the surrounding.
* Entanglement in rotating parts could cause
machine damage.
Check that the terminals and
connectors of the electrical system
are connected correctly.
* Otherwise, starting failure or overrun due to
inability to stop the engine could occur.
1 SAFETY
33