Table 7-7 Scheduled Maintenance For Emergency - Mitsubishi S16R Series Operation & Maintenance Manual

7 SCHEDULED MAINTENANCE
Table 7-7 Scheduled Maintenance for Emergency Use Engine (2/5)
Inspection and
Maintenance Period Service Items
Service period
Engine body
Fuel system
Every year
Lubrication
system
Cooling
system
Air Intake
system
Electrical
system
*1: If the part is not supplied from Shanghai MHI Engine co., Ltd. (SME), service the part following the
supplier's operation manual.
126
• Belt and Belt Tension -Check and Adjust (Replace
parts as needed)
• Bolts and Nuts on Engine - Check and Retighten
• Damper - Check
• Valve Clearance - Check and adjust
(Check the valve mechanism parts at the same time)
• Vibration-Isolating Rubber - Check *1
• Foundation Bolts - Check *1
• Couplings - Check or Replace *1
• Fuel Tank - Drain Water *1
• Water Separator - Drain Water *1
• Fuel Injection Nozzle Spray Condition and Injection
Pressure - Inspect and Adjust
• Fuel Injection Timing - Check and Adjust
• Fuel Pipe -Check
• Oil Pipe - Check
• Engine Oil Properties - Analyze
• Engine Oil Pressure (Maintenance Operation) -
Check and Adjust
• Water Pump -Check
• Solenoid Valve and Pressure Reducing Valve of
Cooling System - Checkt, Disassemble, and Clean *1
• Strainer (Including with Ball Tap) of Cooling Water -
Check, Disassemble and Clean *1
• Coolant Properties - Inspect (Change Coolant Based
on Analysis Results)
• Resin Fan Inspection (Blade Inspection/Cleaning)
• Air Cleaner Element - Clean, Check and Replace
• Pre-cleaner - Clean, Check and Replace
• Starter - Check
• Alternator - Check
• Specific Gravity of Battery Electrolyte - Check *1
• Air Heater - Check
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
Reference
Page
134
136
91
139
8
(Contact your
SME dealer)
141
145
8
(Contact your
SME dealer)
152
163
8
(Contact your
SME dealer)
8
(Contact your
SME dealer)
173
176
175
177
178
177
-
Pub. No. K29001-00320 Revision: 1