Pmod™(Pmod2) - Renesas RX Series User Manual

RSKRX231
5.7 Pmod™(PMOD2)
The RSK board are equipped with connectors for Digilent Pmod™ interface. Please connect the PMOD2
connector that is compatible with the optional PmodSD.
To develop a host device corresponding to the SD standard, it requires the conclusion of SD Host / Ancillary Product
License Agreement (SD HALA).
Care should be taken when installing the PmodSD to ensure pins are not bent or damaged. The Pmod SD is vulnerable
to electrostatic discharge (ESD); therefore appropriate ESD protection should be used.
The Digilent Pmod™ Compatible headers uses an SD interface. Figure 5-2 below shows Digilent Pmod™
Compatible Header Pin Numbering(top view). Connection information for the Digilent Pmod™ Compatible
header is provided in Table 5-5 below.
Figure 5-2: Digilent Pmod™ Compatible Header Pin Numbering
Pin Circuit Net Name
1 SDD3
2 SDCMD
3 SDD0
4 SDCLK
5 GROUND
6 PMOD2_3V3
Rev.
R20UT3027EG0100 1.00
Aug 24, 2015
Digilent Pmod™ Compatible Header (PMOD2) Connections
MCU
Port Pin
PC2
PB0
PC3
PB1
-
-
Table 5-5: Pmod™2 Header Connections
Pin Circuit Net Name
50 7 SDD1
61 8 SDD2
49 9 SDCD
59 10 SDWP
- 11 GROUND
- 12 PMOD2_3V3
5. User Circuitry
MCU
Port Pin
PB6 54
PB7 53
PB5 55
PB3 57
- -
- -
Page 23 of 53