EB-E01 series
4.1 AS (After Service) Menu
The contents of this chapter are only for use of Epson Authorized
Services. Do not disclose them to the end-users.
The body operation Historical Information by which a record was preserved in
the projector and the way to confirm the details of error Historical Information
are explained by this item.
4.1.1 How To Display the AS (After Service) Menu
4.1.1.1 How to enter the AS menu
Start the AS menu with the operation panel (or the remote controller) using the
procedure below.
1. Press and hold the [Menu] button for five seconds or more.
2. Release the [Menu] button, and within four seconds press the [Esc] button
twice consecutively.
(1) Hold down for 5 sec. or more.
SEIKO EPSON
Appendix
4.1.1.2 Menu Contents
The AS menu for this projector consists of eight pages. These pages can be
switched by pressing the [Right]/[Left] button.
The contents/information displayed on each page are as follows.
1st Page
2nd Page
3rd Page
4th Page
5th Page
6th Page
7th Page
8th Page
(2) Release (1) and press
twice
within four seconds
Note: The contents displayed on the screen vary depending on the input source.
171
Page
Information relates to the visual
data which is currently projected.
Operation history of the lamp
Other product information
Version information
Time information (EB-FH52/992F, EH-TW750)
Error/Warning counts
Error/Warning details (Error Info)
Temperature log (Temp Info)
Operation Log (Operation Info)
Ballast error log
INTERNAL USE ONLY
Description
Input source
Signal details
Total lamp operation time
Lamp replacement times,
etc.
Firmware for the main unit
Firmware for subsystem
Status when the error log is
written.
Contents of the error log
Revision A