Preparation; Operating Procedure; Workflow - Epson EB-E01 Service Manual

EB-E01 series

3.6.2 Preparation

Obtain the following tools from the Tech Exchange in advance.
Tool Name
CAT (IRIS/CAT)* 1
"IRIS_MENT.zip" file* 2
2
Model Group List*
Note *1:(Definition file)
*2:Use the latest ones referring to "TI18-25E".
SEIKO EPSON
Disassembly and Assembly
Remark
Install it in your PC.
Save this file to the specified folder.
Necessary for selecting the current
model on the CAT, and also for
preparing the correct ASP for the
projector to be repaired.

3.6.3 Operating Procedure

3.6.3.1 Workflow

The whole replacing operation work flow is shown below.
Check in advance (P.154)
Replacing the Optical Engine (P.156)
Workflow for the replacement using DR data
In the following procedure, refer to the "CAT Operation
Manual" published as the technical information "AP08-
0912E" for more detailed operation procedures of CAT.
153
INTERNAL USE ONLY
Replacing the MA Board (P.158)
Revision A