Troubleshooting By Error Names - Epson EB-E01 Service Manual

EB-E01 series

2.5.2 Troubleshooting by Error Names

To display the error names, see
This section explains the troubleshooting mainly for the troubling parts identified using the error names and device codes displayed on the AS (after service) Menu
and the IPS tool to carry out their necessary repair. If a device code can be identified through the AS Menu or IPS tool, find the specific troubling part from the table
below.
TROUBLESHOOTING FROM THE ERROR NAME ON LAMP ERRORS
Error name Description
Lamp Lamp Burnt Out Error
Lamp lit error
Lamp On
Lamp Off
Lamp Failure
SEIKO EPSON
Troubleshooting
" o Error Name/Warning Name/Device ID/Source Name List
Faulty part/part name
Lamp Lamp is broken.
Air Filter Air Filter is clogging.
Lamp Switch Lamp Switch is broken.
PS Ballast Assy PS Ballast Assy is broken.
Lamp is broken due to the following
reasons:

Cracks on the arc tube
Lamp

Blackening/whitening of the arc tube

Swelled arc tube
PS Ballast Assy PS Ballast Assy is broken.
(p179)".
Cause
Replace Lamp.
Clean Air Filter. Replace it if not improved.
Replace Lamp Switch.
Replace PS Ballast Assy.
Replace Lamp.
Replace PS Ballast Assy.
43
INTERNAL USE ONLY
Remedy Reference
P.74
P.73
P.86
P.122
P.74
P.122
Revision A