Epson EB-E01 Service Manual page 189

EB-E01 series
4. When all indicators light up, release the [Esc] button.
When the indicator changes to flash, the data file is written to the USB
memory. When the writing is completed successfully, the projector turns
into the stand-by state.
 During writing a data file in, don't remove power cord or USB memory
from a projector. If the power cord or the USB memory is removed, the
projector may not start normally.
5. Remove the USB memory.
SEIKO EPSON
Appendix
4.1.2.3.2 Confirmation method
1. Connect the USB memory in which a data file was written to PC.
2. Start IPS tool, and click [Error Information]. (PC screen:
method which connects PC with projector
3. When [Batch data input] is clicked, [PJCONFDATA.BIN] is read from
USB memory.
4. Acquired information is indicated. (PC screen:
which connects PC with projector
189
INTERNAL USE ONLY
Confirmation
P.184)
Confirmation method
P.184)
Revision A