Epson EB-E01 Service Manual page 42

EB-E01 series
LED Status
Power Status Lamp
SEIKO EPSON
Troubleshooting
Corresponding error name
Temp Wireless LAN

Lamp: Lamp Error

Lamp On: Lamp Lit Error

Lamp Off: Lamp Failure
Take out the lamp and check if
the Lamp is cracked or
damaged.
Air Filter condition
(dirt accumulation, clogging)
If the projector has been used at
a place where is 1500 meters or
higher above sea level:
After trying above remedies:
42
INTERNAL USE ONLY
Remedy Reference
If the Lamp is cracked/
damaged,
replace it with a new one.
If clogging is found, clean or
replace the Air Filter.
P.43
If the High altitude mode is
ON, set it to OFF.
If the same error occurs after
turning the power back on,
check the error name and carry
out the remedy referring to the
references on the right column.
Revision A