Epson EB-E01 Service Manual page 81

EB-E01 series
3. Remove the three (four) screws ( / ) from the top.
(EB-118 and PL 119W have the
Be careful as the FFC "SW Cable" is connected to the
switch board on the INT Duct side of the main unit.
4. Remove the FFC, and then remove the "Upper Case (Assy)".
(See How to unlock connectors for FFC/FPC
Screws
SEIKO EPSON
Disassembly and Assembly
screws)
(p67))
Upper Case (Assy)
81
INTERNAL USE ONLY
SW Cable
C.B.P-TITE SCREW,2.5X10,F/ZN-3C
C.P.(S-P1)SCREW,2.5X6,F/ZN-3C
Revision A