Epson EB-E01 Service Manual page 133

EB-E01 series
 EB-E01/X06/W06/FH06/E10/X51/W51/W52/E20/X49/W49/118,
PL 119W, EH-TW740/TW750
1. See Flowchart (p70) and remove all parts up to the component below from
the projector.
PS Ballast Assy (p122)
2. Remove the screw ( ) and remove the "TH Board" and the "TH Cable
H550".
3. Remove the "INT Duct B".
4. Remove the two screws ( ) and remove the "INT Fan".
5. Remove the following parts from the "INT Fan".
 INT Duct Cushion Seal C
 Cable Fasten Tape x3 pcs
SEIKO EPSON
Disassembly and Assembly
INT Duct B
TH Board
133
INTERNAL USE ONLY
INT Duct A
INT Duct Cushion Seal C
TH Cable H550
INT Fan
Cable Fasten Tape
C.B.P-TITE SCREW,2.5X10,F/ZN-3C
C.B.P-TITESCREW,3X15,F/ZN-3C
Revision A