Epson EB-E01 Service Manual page 111

EB-E01 series
 EB-972/982W/992F/118, PL 119W
1. See Flowchart (p70) and remove all parts up to the component below from
the projector.
MA Board Assy (p100)
2. Remove the "IF Shade Cover".
3. Remove the two screws ( ) and remove the "Conduction Plate 3RCA"
from the "MA Frame".
4. Remove the one screw ( ), the three screws ( ), the eight screws ( ),
and remove the "MA Frame" from the "MA Board (Assy)".
5. Remove the two screws ( ) and remove the "IF Board" from the "MA
Board (Assy)".
SEIKO EPSON
Disassembly and Assembly
MA Board (Assy)
C.P.(S-P1)SCREW,2.5X6,F/ZN-3C
C.B.SCREW,3X6,F/NI
111
INTERNAL USE ONLY
IF Shade Cover
IF Board
Conduction Plate 3RCA
1/4-40X1/4,H.H.,F/NI,O SCREW
C.B.P-TITE SCREW,3X8,F/ZN-3C
MA Frame
Revision A