Required Tools - Epson EB-E01 Service Manual

EB-E01 series

2.1 Required Tools

The following tools are required in order to carry out troubleshooting of this
projector.
Name Qt.
Projection screen 1
Genuine power cable 1
Genuine remote controller 1
Host computer 1
PC cable 1
Video equipment 1
Audio and Video cables
(HDMI/Composite/USB, and 1 each
each audio)
Multi tester 1
2
Double-sided tape q.s.*
General tools 1 set
RS-232C cable 1
USB memory or USB cable 1
IPS tool 1
CAT 1
Intra-mart 1
RESCUE 1
USB firmware for updater 1
EasyMP Network firmware for
1
updater
Microsoft .Net Framework 3.5
1
or later
USB COM Driver 1
*1: When repairing a wide panel (16:10) model, prepare the video source and devices
considering the full screen display of 16:10 aspect.
*2: q.s.: Sufficient quantity
SEIKO EPSON
Application/Other
To project images on.
To output audio and video data to the projector*
(To check the component video input)
To control service tools
To output audio and video data to the projector*
(To check the HDMI and composite video input)
To measure resistance values and voltages (AC/
DC).
To secure parts
Tools given in " 3.1.4 Tools (p66)".
For writing DR data
For USB Updater
See " 3.5.10 Service tool list (p150)".
Troubleshooting
1
1
33
INTERNAL USE ONLY
Revision A