Installation Method; Preparation; Checking The Installation Location; Attaching The Projector Mount To The Projector - Epson ELPMB67 Installation Manual

Installation Method

Preparation

Checking the Installation Location

Before installing, check the projection distance to the screen and make sure the projector is in the correct
position.
The projection distance to the screen varies depending on the projector. See the User's Guide supplied with
the projector you are using.

Attaching the projector mount to the projector

Attaching the projector mount

Attach the projector mount to the bottom of the projector using the supplied M6 x 15 mm bolts (x4).
Make sure that the

Preparing the Suspension Adapter (when Using ELPFP15)

c
When using the veneer plate supplied, pass the plate over the ceiling mount pipe in advance.
Attaching the veneer plate makes the gap between the installation surface and the Suspension
Adapter less noticeable.
mark on the projector mount is facing the lens side of the projector.
11