Table of Contents
Advertisement
Mini-mite Tube Furnace
Complete the following steps to change the ramp rate of SSP.
6. Press the SCROLL
7. Press UP
or DOWN
display. The unit of ramp rate depends on the type of ramp unit RAMPU selected.
8. The new ramp rate is applied when the button is released and is indicated by a brief
flash of the display.
9. Press PAGE
button to return to HOME display.
View or Change the Display Units
To change the temperature scale in 3216 controller to operate on °F instead of the factory
setting of °C, or to change from °F to °C, follow these steps.
1. Press the SCROLL
current unit is shown in the upper display.
2. Press UP
or DOWN
a. (°C): Degrees Celsius
b. (°F): Degrees Fahrenheit
c. (°K): Kelvin
Main Controller: 1x8 & 5x16 Segment Programmable |
button until SP.RAT is displayed.
button until the desired ramp rate is indicated on the
button until "UNITS" is shown in the lower display. The
button to change the display unit.
Chapter 6
304243H02 | 6-24
Hide quick links:
Advertisement
Table of Contents
