Pentax DSI-200 Series User Manual page 98

Setting
Range
For display running parameters, it set which display parameters to view during running.
The most available state parameters are 32, according to the values of P7-03 and P7-04, to
select the state parameters that need to be displayed, and the display order begins at the
lowest bit of P7-03.
LED display stop parameters
P7-05
P8 Group Auxiliary Function
Jog frequency reference
P8-00
Setting Range
P8-01
Setting Range
P8-02
7 6 5
0 0 0
0 ～
FFFF
15 14 13
If a parameter needs to be displayed during running, set
Corresponding bit to 1, and set F7-04 to hexadecimal
equivalent.
Jog acceleration time
Jog deceleration time
4 3 2 1 0
PID feedback
PLC stage
High-speed pulse reference (kHz)
Running frequency 2(Hz)
Remaining running time
AI1 voltage before correction (V)
AI2 voltage before correction (V)
AI3 voltage before correction (V)
12 11 10 9 8
Motor speed
Current power-on time (Hour)
Current running time (Min)
High-speed pulse input reference (Hz)
Communication reference
Encoder feedback speed (Hz)
Main frequency A display (Hz)
Auxiliary frequency B display (Hz)
Factory
default
Factory default
0.00Hz～Maximum frequency
Factory default
0.0s～6500.0s
Factory default
- 98 -
0
6.00Hz
20.0s
20.0s