Pentax DSI-200 Series User Manual page 60

Pic 6-1
Select the input channel for the given frequency of the drive. AI1, AI2, AI3, high-speed pulse
setting (S5), multi-segment instructions, PLC, PID, and so on.
Notes: P0-23 is "digital setting frequency stop memory selection", P0-23 is used to select
whether the correction amount of frequency is memorized or cleared when the inverter is
stopped. P0-23 no relate to shut down, not related to power-down memory, the application
should pay attention.
8：PID
Select the output of the process PID control as the operating frequency. Generally used in
the field of closed-loop control technology, such as constant pressure closed-loop control,
constant tension closed-loop control and other occasions.
When PID is used as the frequency source, it is necessary to set the parameters related to
PID function of PA group.
9：Communication given
The frequency is given by communication.
When a point-to-point communication slave is used and the received data is given as a
frequency, the host uses the data transfer as the communication set point (see A8 group
description)
Otherwise the host computer communication address 0 × 1000 given data, the data format is
- 60 -