Pentax DSI-200 Series User Manual page 108

Detection level of current 1
P8-38
Setting
Range
Detection width of current 1
P8-39
Setting
Range
Detection level of current 2
P8-40
Setting
Range
Detection width of current 2
P8-41
Setting
Range
When the output current of the inverter reach into the positive and negative detection
width, the multi-function terminal HDO outputs the ON signal.
DSI-200 provides two sets of arrival current detection width parameters. Figure 6-23 is
functional schematic diagram.
Figure 6-22 Output current limit.
Factory
default
0.0%～300.0%（ rated motor current ）
Factory
default
0.0%～300.0%（ rated motor current ）
Factory
default
0.0%～300.0%（ rated motor current ）
Factory
default
0.0%～300.0%（ rated motor current ）
- 108 -
100.0%
0.0%
100.0%
0.0%