Pentax DSI-200 Series User Manual page 14

3. Mechanical and Electrical Installation
3.1 Mechanical Installation
3.1.1 Installation environment:
1) Ambient temperature: The ambient temperature has a great influence on the life of
the inverter. Do not allow the operating temperature of the inverter to exceed the
permissible temperature range (-10 ℃ ~ 40 ℃).
2) Mount the inverter on the surface of the flame retardant and attach it to the mounting
bracket vertically with screws. Inverter work easy to produce a lot of heat, there should
be enough space around the heat.
3) Please install it where it is not easy to vibrate. Vibration should not be greater than
0.6G. Special attention away from the punch and other equipment.
4) To avoid the place in the direct sunlight, wet, there are drops of water.
5) To avoid installed in the air corrosive, flammable, explosive gas of the place.
6) To avoid the equipment in the oil, dust, dust and more places.
14