Pentax DSI-200 Series User Manual page 148

I.2 Non-Parameter Data
Status data (read
DSI-200.
Non-Parameter
Control
Control
Data
parameters
parameters
(write-only)
(write-only)
1. Status Data
Status data includes group d (monitoring parameters), AC drive
fault description and AC drive running status.
●. Group d (monitoring parameters)
The high 16 bits in communication address of d0 to dF is 70 to 7F
and the low 16 bits indicate the function code number in the group.
For example, the communication address of d0-11 is 700BH.
●. AC drive fault description
When fault description is read via communication, the
communication address is
8000H. you can obtain current fault code of the AC drive by
reading the address.
●. AC drive running status
When the drive running status is read via communication, the
communication address is 3000H. You can obtain current running
status information of the AC drive by reading the address. The
running status is defined in the following table.
Communication Address of
Group d monitoring parameters, AC drive fault information
and AC drive running status
only)
Control commands, communication setting values, AO1
information and AC drive running status
control, AO2 control, high-speed pulse (FMP) output
Control commands, communication setting values, DO
control and parameter initialization
control, AO1 control, AO2 control, high-speed pulse
(FMP) output control and parameter initialization
Running Status Status Definition
148