MICRO-EPSILON induSENSOR MSC7401 Operating Instructions Manual page 71

Anhang | Software
The channels found are now listed in the overview.
Fig. 65 Window Change serial configuration - sensorTOOL
i
A sensor address can be assigned for the sensor.
i
The following window
MSC7401 / 7802 / 7602 Miniature sensor controller for inductive displacement sensors
Click the Configure serial interface button to set the basic settings for the serial interface.
Set the baud rate to 256,000.
Please observe the DIP settings of
Start the data acquisition/configuration by clicking Start Data Acquisition or the controller pic-
ture, see Fig. 64.
appears, see Fig.
MSC7602, see Fig. 60.
66.
Page 71