GE PhastSystem User Manual page 37

6. Press " " or " " until the first character you want in the name
appears in the parentheses to the right, for example,
3 can be called IEF 3-9.
SEP 3
7. Press "do" to enter this character into the name field:
SEP 3
8. Continue with steps 5 and 6 above to enter the rest of the char-
acters. A method name can have up to 10 characters.
SEP' 3
To continue programming to method
9. Press "SEP method file", the method number ("3"), and "do".
METHOD 3
The name of the method will now appear on the display. We will
continue with method 3 as an example in the following instruc-
tion steps.
Programming sample application
10. Press "step forward" for the instruction:
SAMPLE APPL. DOWN AT 3.0
11. Enter the step number when the sample applicator is to be
lowered onto the gel, for example, enter step 1 :
SAMPLE APPL. DOWN AT 3.1
12. Press" " and enter the time (volthours), in the current step,
where the sample will be applied to gel (step 1, in this example).
For example, 75 volthours:
SAMPLE APPL. DOWN AT 3.1
13. Press "step forward" to program the second sample application
instruction. Enter the step number (can be the same as for
applicator down), press " " and enter the volthours that will
elapse before the sample applicator is raised from the gel, for
example:
SAMPLE APPL. UP AT 3.1
Programming the extra alarm
14. Press "step forward" for the extra alarm instruction. Enter the
step number, press " ", and enter the number of volthours
that will elapse in this step before the extra alarm sounds, for
example:
EXTRA ALARM TO SOUND AT 3.1
The extra alarm can be programmed to sound anytime during
the run, for example, to let you know when it's time for sample
application so that you can pause the run if you need more time
to load the sample applicators.
Note: An alarm sounds automatically at the end of the method.
[_ ] (I)
[I_ ] (I)
[IEF 3-9_ ] (9)
NAME IEF 3-9
0000 Vh
0000 Vh
0075 Vh
0150Vh
5. Operation
method
0073 Vh
37