FOR-A FA-9600 Series Operation Manual page 70

Frame synchronizer
Hide thumbs Also See for FA-9600 Series:
Table of Contents

Advertisement

Item
Default
ARIB
Disable
STD-B37
ARIB
Disable
STD-B39
User Packet
(DID/SDID)
Disable
(*1)
(*1) Planned for future support
<Process Delay>
This process requires up to 2 frames. So, if the synchronizer operates in Line or AVDL mode, where
the I/O delay is smaller, the packets may be delayed against video by 2 frames. To compensate for
such a situation, use the converter delay line to add a delay to video. If video signals are delayed by
more than 2 frames due to conversion process, the delay time is automatically added to ANC
packet data.
<User Packet Insertion on Format Conversions>
60/59.94/50/48/47.95p
Frame 1
Packet A
Frame 2
Packet B
1
Frame 3
Packet C
Frame 4
Packet D
Frame 1
Packet A
Frame 2
Packet B
1'
Frame 3
Packet C
Frame 4
Packet D
60/59.94/50p
2
Frame 1
Packet A
Frame 2
Packet B
30/29.97/28/24/23.98p
3
Frame 1
Packet A
Setting
Disable: Disables ANC data insertion.
Disable
Through: The packet data is extracted from the SDI
Through
signal and inserted directly into an appropriate place on
Disable
the SDI output whose line number varies depending on
Through
the signal format. The packets may be lost or
overlapped due to timing alignment, if the input signal is
Overwrite
not synchronized with the reference.
User packet insertion line can be specified in the ANC
USER PACKET menu (see Sec. 5-38).
Overwrite: Inserts the packet defined in ARIB STD-B39
Disable
by partially rewriting the input data (video mode / audio
Through
(expansion) mode). The additional information should
be set under Audio Method and Audio Mode Data in the
"AUDIO MUX MODE (ARIB STD-B39)" menu. (See
Sec. 6-4)
P to P conversion
(Framerate reduced by half)
Allows one packet per 2 frames.
Allows one packet per 2 frames.
P to I(PsF) conversion
(more than 30 frames)
Inserts frame packets to fields.
P to P conversion
(Framerate doubled)
Inserts one packet per 2 frames
70
Simultaneous 4K/HD
Dual HD
3D-LUT (FS1)
Description
I: Interlace and 3G Level-B
P: Progressive
PsF: Segmented frame
30/29.97/25/24/23.98p
Frame 1
Packet A
Frame 2
Packet C
Frame 1
Packet B
Frame 2
Packet D
60/59.94/50i(30/29.97/25PsF)
Field 1
Packet A
Field 2
Packet B
60/59.94/50/48/47.95p
Frame 1
Packet A
Frame 2
(None)

Advertisement

Table of Contents
loading

Table of Contents