FOR-A FA-9600 Series Operation Manual page 140

Item Default
ATC
Source
(LTC)
Loss Mode Stay
Adjust 0
Set the followings if Source is set to Generator.
Start/Stop
-
button
Reset button -
Preset value
-
Preset button
Drop Frame Off
Setting
Selects the timecode source.
S12M-1 ATC(LTC): ATC(LTC) timecode in the
ATC(LTC)
SDI input
ATC(VITC)
S12M-1 ATC(VITC): ATC(VITC) timecode in the
DVITC
SDI input
LTC IN
DVITC: DVITC timecode in the SD-SDI input
Generator
LTC IN: LTC input (FA-96DIN4-CBL required)
Generator: Generator's timecode
Selects the way to recover when a timecode loss
is detected.
Stay
Stay: Stays outputting the last timecode.
Continue
Continue: Continues running with the timing
Output
before loss and keeps the continuity.
Disable
Output Disable: Stops timecode output when
the source loss is detected.
Sets the offset from the source timecode.
-16 to +16
Negative numbers delay the timecode.
Clicking Start starts the timecode.
-
Clicking Stop stops the timecode.
- Resets the timecode.
- Sets the timecode to a preset value.
Selects drop frame or non-drop frame timecode.
Non-Drop
Drop
Drop is available only for 29.97/30Hz signals.
140
Description