FOR-A FA-9600 Series Operation Manual page 61

NOTE
If input and output signals are the same format, or converting signals between 1080 and 4K, only
simple resolution conversion is performed, but scaling are not performed because higher priority
is given to minimizing process delay. In such cases, you still need to perform scaling or
positioning, enable this menu. Note that enabling this menu requires one frame delay.
◆
RESIZE 2 (Available if Scaling is set to Enable)
Item
Horizontal Size
Vertical Size
Horizontal
Position
Vertical Position
◆
RESIZE 3 (Available if Scaling is set to Enable)
Cropping Left
Cropping Right
Cropping Top
Cropping Bottom
Horizontal Position
Video signal
2160p
1080i/p
720p
525i (NTSC)
625i (PAL)
Default Setting
100.0% 50.0% to 150.0%
100.0% 50.0% to 150.0%
0 Pixel See the table below.
0 Line See the table below.
0 Pixel
See the table below.
0 Pixel
0 Line
See the table below.
0 Line
Vertical Position
(per 2-pixel)
-1920 to 1920 -1080 to 1080
-960 to 960 -540 to 540
-640 to 640 -360 to 360
-360 to 360 -243 to 243
-360 to 360 -288 to 288
61
Description
Selects the horizontal image size
ratio after conversion.
Selects the vertical image size ratio
after conversion.
Selects the horizontal image
position after conversion.
Selects the vertical image position
after conversion.
Crops the image from the left side.
Crops the image from the right side.
Crops the image from the top.
Crops the image from the bottom.
Cropping Left
Cropping Top
Cropping Right
Cropping Bottom
(per 2-pixel)
0-1918
0-958
0-638
0-358
0-358
0-1079
0-539
0-359
0-243
0-287