FOR-A FA-9600 Series Operation Manual page 6

Installing the AC Cord Retention Clip
Secure the AC cord with the supplied ladder strap/retention clip assembly to prevent accidental
removal from the unit.
◆
Installing the clip
1) Wrap the retention clip around the AC cord (with the anchor of the ladder strap toward the
unit).
2) Insert the anchor into the hole next to the AC IN socket.
3) Lightly fasten the clip around the AC cord.
4) Plug in the power cord.
5) Slide the clip on the ladder strap toward the plug.
6) Fasten the clip tightly.
7) Gently pull on the AC cord to ensure it is secured.
2)
◆
Unplugging the AC cord
1) Push the tab on the retention clip up to
unfasten the clip.
2) Push the tab on the ladder strap up and
slide the clip back.
3) Unplug the AC cord.
Installing the HDMI Cable Lacing Bracket
Secure the HDMI cable to the panel with the supplied cable lacing bracket.
1) Plug the HDMI cable into the HDMI connector on the rear panel.
2) Loosen (but do not remove) the screw above the connector.
3) Place the bracket on the screw, above the connector.
Tighten the screw (but not too tight) to secure the bracket.
4) Use the supplied tie wrap to secure the bracket to the connector.
5) Tighten the tie wrap and cut off any excess.
2)
4)
3)
5)
3)
1)
6
1)
4)
5)
6)
2)