FOR-A FA-9600 Series Operation Manual page 124

Frame synchronizer
Hide thumbs Also See for FA-9600 Series:
Table of Contents

Advertisement

Scaling
Item
Default
Scaling
Disable
The following settings are available if Scaling is set to Enable.
Size/Position / Crop
Item
Default
Horizontal Size
100.0%
Vertical Size
100.0%
Horizontal
Position
Vertical
0 Line
Position
Left
Right
Top
0 Line
Bottom
0 Line
Aspect Convert
Item
Default
SD
(4:3) Full
Output
frame 4:3
HD
(16:9) Full
Output
frame 16:9
SD
4:3
Input
Setting
Disable
Enables/disables scaling or positioning up to 2K size for
Size, Position and Crop.
Enable
Setting
50.0 to 150.0%
50.0 to 150.0%
Varies depending
0 Px
on the signal
format.
(See Sec 5-22.)
0 Px
Varies depending
0 Px
on the signal
format.
(See Sec 5-22.)
Setting
(4:3) Letterbox 16:9 at top
(4:3) Letterbox 14:9 at top
(4:3) Letterbox greater than 16:9
(4:3) Full frame 4:3
(4:3) Letterbox 16:9 protected
(4:3) Letterbox 14:9
(4:3) Full frame 4:3 Alternative 14:9
(4:3) Letterbox 16:9 Alternative 14:9
(4:3) Letterbox 16:9 Alternative 4:3
(16:9) Letterbox greater than 16:9
(16:9) Full frame 16:9
(16:9) Pillarbox 4:3
(16:9) Full frame protected
(16:9) Pillarbox 14:9
(16:9) Pillarbox 4:3 Alternative 14:9
(16:9) Full frame 16:9 Alternative 14:9
(16:9) Full frame 16:9 Alternative 4:3
(16:9) Letterbox greater than 16:9
(16:9) Full frame 16:9
(16:9) Pillarbox 4:3
(16:9) Full frame protected
(16:9) Pillarbox 14:9
(16:9) Pillarbox 4:3 Alternative 14:9
(16:9) Full frame 16:9 Alternative 14:9
(16:9) Full frame 16:9 Alternative 4:3
4:3
16:9
124
Description
Description
Selects the horizontal image size
ratio after conversion.
Selects the vertical image size ratio
after conversion.
Selects the horizontal and vertical
image position after conversion.
Crops the image from the left side.
Crops the image from the right side.
Crops the image from the top.
Crops the image from the bottom.
Description
Sets the aspect ratio
when converting
HD-SDI to SD-SDI
signals.
Sets the aspect ratio
when converting
SD-SDI to HD-SDI
signals.
Selects the SD input
aspect ratio.
If the input image is
horizontally squeezed,
set to 16:9.

Advertisement

Table of Contents
loading

Table of Contents